Update for VPHybridCAD/VPview V17 and VPmap/VPindex V10


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Service Pack applies to:
    VPHybridCAD V17/V17.1
    VPmap Series V10/V10.1
    VPindex V10/V10.1
    VPview V17/V17.1

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 17/10 installations of VPHybridCAD/VPmap/VPindex/VPview will be offered.
The Update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    UpdateV17.2-win32.zip
    (108 MB, June 28th, 2022)

    UpdateV17.2-x64.zip
    (124 MB, June 28th, 2022)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Update for VPHybridCAD/VPview V16 and VPmap/VPindex V9


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Service Pack applies to:
    VPHybridCAD V16
    VPmap Series V9
    VPindex V9
    VPview V16

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 16/9 installations of VPHybridCAD/VPmap/VPindex/VPview will be offered.
The Update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    UpdateV16.1-win32.zip
    (140 MB, May 22nd, 2020)

    UpdateV16.1-x64.zip
    (153 MB, May 22nd, 2020)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Update for VPHybridCAD/VPview V15 and VPmap/VPindex V8


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Service Pack applies to:
    VPHybridCAD V15 + V15.1
    VPmap Series V8 + V8.1
    VPindex V8 + V8.1
    VPview V15 + V15.1

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 15/8 installations of VPHybridCAD/VPmap/VPindex/VPview will be offered.
The Update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    UpdateV15.2-win32.zip
    (125 MB, April 8th, 2019)

    UpdateV15.2-x64.zip
    (130 MB, April 8th, 2019)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Service Pack 4 for VPHybridCAD/VPview V14 and VPmap/VPindex V7


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Service Pack applies to:
    VPHybridCAD V14.01/14.1
    VPmap Series V7.01/7.1
    VPindex V7.01/7.1
    VPview V14.01/14.1
    (with or without SP1/SP2)

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 14/7 installations of VPHybridCAD/VPmap/VPindex/VPview will be offered.
The Update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    ServicePackV14-4-win32.zip
    (65 MB, October 10th, 2017)

    ServicePackV14-4-x64.zip
    (76MB, October 10th, 2017)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Service Pack 2 for VPHybridCAD/VPview V13 and VPmap/VPindex V6


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Service Pack applies to:
    VPHybridCAD V13.01
    VPmap Series V6.01
    VPindex V6.01
    VPview V13.01
    (With or without SP1)

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 13/6 installations of VPHybridCAD/VPmap/VPindex/VPview will be offered.
The Update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    ServicePackV13-2-win32.zip
    (71 MB, April 14th, 2016)

    ServicePackV13-2-x64.zip
    (75 MB, April 14th, 2016)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Update for VPHybridCAD/VPview V12 and VPmap/VPindex V5


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Update applies to (with and without SP1 or SP2):
    VPHybridCAD V12.01
    VPmap Series V5.01
    VPindex V5.01
    VPview V12.01

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 12/5 installations of VPHybridCAD/VPmap/VPindex/VPview will be offered.
The Update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    UpdateV12-win32.exe
    (78 MB, August 1st, 2014)

    UpdateV12-x64.exe
    (72 MB, August 1st, 2014)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Service Pack 2a for VPHybridCAD/VPview V11.02 and VPmap Series V4.02


Important: This service is for registered users only. If you have not yet registered your VP software license with softelec, please do so first. Either, use the paper registration form from your VP product box,
or take the convenient way and register online today.

The Service Pack applies to:
    VPHybridCAD V11.02 (SP1/SP1a/SP2)
    VPmap Series V4.02 (SP1/SP1a/SP2)
    VPview V11.02 (SP1/SP1a/SP2)
If your VPHybridCAD/VPview/VPmap installation is not yet Version x.02 SP1, please update to Version x.02 SP1 first (see below).

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update. All Version 11/4 installations of VPHybridCAD/VPmap will be offered. Please check your current installation carefully.
The Service Pack is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Attension:
If you have already installed the Service Pack 2 from August 7 you will get the message that you have already installed Version 11.02.0003 together with the question to continue installing this Service Pack anyway. Answer this with "Yes". This will also solve any problems you may have had when trying to uninstall your VP product. softelec apologize for all inconvenience due to that.



Please select carefully according to your current installation:



    ServicePack 2a.exe
    (29.8 MB, September 19, 2012)

    ServicePack 2a x64.exe
    (18.9 MB, September 19, 2012)

ReadMe: a detailed list of corrections and enhancements can be downloaded here.


Actualizaciones para VPHybridCAD/VPview V11 y VPmap Series V4


Importante: Este servicio es solamente para usuarios registrados. Si su licencia del software VP aún no fue registrada con la softelec, por favor, regístrela primero.
O llene el formulario de registro que acompaña la caja del producto (y envíenos veía fax o correo), o haga ahora el registro ONLINE.

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update.
The update is valid for VP software in both, "stand-alone" and inside AutoCAD installations.

Please select carefully according to your current installation:



    SP1 VP V4.02+V11.02.exe
    (59.5 MB, September 16, 2011)

    SP1 VP V4.02+V11.02x64.exe
    (41.3 MB, September 16, 2011)

LeaMe: una lista detallada de correcciones y mejorías puede ser descargada aquí.


Actualizaciones para VPindex V4


Importante: Este servicio es solamente para usuarios registrados. Si su licencia del software VP aún no fue registrada con la softelec, por favor, regístrela primero.
O llene el formulario de registro que acompaña la caja del producto (y envíenos veía fax o correo), o haga ahora el registro ONLINE.

When running the update installation program you will be guided through a dialog. Start the update program after download. Your installed VP software products will be displayed to confirm an automatic update.

Download the Service Pack here:

    SP1 VPindexV4.02.exe (11.4 MB, September 16, 2011)

LeaMe: una lista detallada de correcciones y mejorías puede ser descargada aquí.


Actualizaciones para VPHybridCAD V10.03 y VPmap Series V3.03


Importante: Este servicio es solamente para usuarios registrados. Si su licencia del software VP aún no fue registrada con la softelec, por favor, regístrela primero.
O llene el formulario de registro que acompaña la caja del producto (y envíenos veía fax o correo), o haga ahora el registro ONLINE.

softelec provides an Update to Version Vx.11 for Version x.03 and Version x.1 which includes some new features and fixes.
The Update applies to:
    VPHybridCAD V10.03, V10.03 SP1, and V10.1
    VPmap Series V3.03, V3.03 SP1, and V3.1
If your VPHybridCAD/VPmap installation is not yet Version x.03, please update to Version x.03 first. If you have already installed Version 10.1 or 3.1 and want to work with AutoCAD 2010, we strongly recommend to uninstall this version and reinstall Version 10.11 or 3.11 again. Navigate to "Demo" to download the complete program packages.

Download the Service Pack here:
    VP Vx.11-Update.exe (31.8 MB, October 13, 2009)

After download double click for guided installation.

LeaMe: una lista detallada de correcciones y mejorías puede ser descargada aquí.


Actualizaciones para VPHybridCAD/VPview V10 y VPmap Series V3


Importante: Este servicio es solamente para usuarios registrados. Si su licencia del software VP aún no fue registrada con la softelec, por favor, regístrela primero.
O llene el formulario de registro que acompaña la caja del producto (y envíenos veía fax o correo), o haga ahora el registro ONLINE.

softelec provides an Update to Version x.03 which includes multiple improvements and fixes.
The Update applies to:
    VPHybridCAD V10
    VPmap Series V3
    VPview V10
Download the Update here:
    VP Update 1-2009.exe (34,4 MB, Januar 16, 2009)

After download double click for guided installation.

LeaMe: una lista detallada de correcciones y mejorías puede ser descargada aquí.


Actualizaciones para VPHybridCAD/Vpview V9 y VPmap Series V2.1


Importante: Este servicio es solamente para usuarios registrados. Si su licencia del software VP aún no fue registrada con la softelec, por favor, regístrela primero.
O llene el formulario de registro que acompaña la caja del producto (y envíenos veía fax o correo), o haga ahora el registro ONLINE.

softelec provides a "Filter Update/Patch" which includes improvements on import and export handling for several file formats, plus a few general program corrections. Especially, corrections for DWG, PDF, TIF and SVG formats have been worked in.
The Filter Update/Patch updates installations of:
    VPHybridCAD 9.03
    VPmap Series 2.13
    VPview 9.03
Download the Filter Update/Patch here:
    VPPatch-1-2008.exe (9,8 MB, February 27, 2008)

After download double click for guided installation.

LeaMe: una lista detallada de correcciones y mejorías puede ser descargada aquí.


El Service Pack 2: actualiza instalaciones de lo
    VPHybridCAD 9.0x para 9.03
    VPmap Series 2.1x para 2.13
    VPview 9.0x para 9.03:
Descargar el Service Pack aquí:

    VP Service Pack 2-2007.exe (109MB, Julio 20, 2007)

LeaMe: una lista detallada de correcciones y mejorías puede ser descargada aquí.


Archivos de actualizaciones/correcciones


Actualizaciones/correcciones para versiones antiguas del VPHybridCAD, VPmap Series y VPview pueden ser descargadas aquí.


Actualizar VPLicenseManager


Actualice este producto en su servidor, se desea usar las últimas licencias de productos VP, en la red de trabajo de su empresa:

    - Des-instalar el VPLicenseManager anterior
    - Descargar, extraer los archivos del zip y re-instalar el VPLicenseManager en su servidor
       VPLicenseManager V2.70 (4,1 MB, Septiembre 21, 2016)